The 9 most common failures in washing machines (2024)

The 9 most common failures in washing machines (2)

In any case, most customers are usually satisfied with the repairs carried out by professionals. Let’s not forget that washing machines are very robust equipment, manufactured to last for many years, at least 10 or even 15 if they are not used much or are from high-end brands. One piece of advice that our professionals always give us is that, if any part needs to be repaired, that it be used of quality and, if possible, original, from the same manufacturer (Whirlpool, General Electric, Samsung, Nisato, GPlus, LG, Mabe, Frigidaire, etc.). With this, we will be prolonging the useful life of our washing machine.

Washing Machine Service in Coimbatore

Let us now see what are its most common failures.

The washing machine does not turn on

The first thing in these cases is to check the power outlet. Sometimes the problem may be outside of the washing machine.If you just used it recently, it could be that the motor overheated. In this case, for safety, the washing machine will not turn on until it cools down.Finally, check the switches and try different programs before calling the technician.

boot failure

It is on and we press the “start” or “start” button and nothing happens.

The causes are very varied. They can range from an electrical failure, lack of voltage, to filter saturation problems. It may also be due to a problem with the door closing, which prevents the washing program from starting. Finally, the lack of water due to an obstruction in the inlet pipe can also be a cause (so check that the water has not been cut off!).

With this type of failure, which is very common, the first thing that the specialized technician will do is a very extensive diagnosis, in order to determine the cause of the problem. It can be incredibly simple (filter cleaning) or more expensive and complex (power failure).

LG Washing Machine Service in Coimbatore

The washing program stops and does not complete

This fault occurs when you have started a washing program and after a short time the washing machine stops. In such cases, the most common is that there is a problem with the water, either in the white water supply or in the pipes and/or outlet filters. For me, this is one of the worst problems, since you have your clothes and water inside and you can’t open the door.

To get the water out of the washing machine and access your clothes, you will have to do a manual drain. This solves the problem on many occasions, since what can happen is that the filter has become saturated precisely during that wash.

Another reason may be due to an overload of clothes in the drum. The weight of wet clothes, mainly large towels or bath mats, affect the washer’s sensors and the washer turns off. An excessive amount of clothing can also overload the motor that stops to cool down.

Samsung Washing Machine Service in Coimbatore

Sometimes the fault can be in the drive belt. To find out, simply, once the clothes are removed, try to turn the drum. If there is no resistance, it is probably the belt.

Other causes may be in the pump or motor. For example, if the water heating is defective, the washing machine usually stops in the middle of the cycle.

In any case, it is better to call the technician as soon as possible.

Faulty spin

In this case, the most common is that the fault is in the drum of the washing machine or in the pump. You can perceive it by strange noises, vibration, lack of speed, etc. The result is always the same: your clothes are soaked.

This failure requires time to diagnose and a good specialist technician. The chances that you will have to change a part are very high, although on other occasions it may simply be an object obstructing the mechanism… Hence the importance of looking carefully at those pockets before putting the clothes in the washing machine.

Whirlpool Washing Machine Service in Coimbatore

excessive noise

You notice it the second. Your washing machine now makes noises or a vibration that it did not make before. The most common is that the fault is in the filter, the drain, the drum or in the bearings.

Do not continue using it because you can cause more damage.

As in the previous case, it is likely that the technician will have to disassemble the washer to find the source of the problem.

At the end of the wash there is still water in the washing machine

The most common cause of this failure is a blockage of the drain pipes and filters. Also, depending on the life of the washing machine, you may have problems with the motor or the pump and it can no longer evacuate water as well as before or you see that your clothes are very soaked. In the latter case, it would be a progressive increase in water at the end of the wash, over months. If this problem occurs from one day to the next, the most normal thing would be a blockage or a failure in the pump.

Bosch Washing Machine Service in Coimbatore

Water comes out from somewhere in the washing machine

If you see water on the ground and you don’t know where it comes from, problem. Sometimes we have loaded the washing machine too much and in some models a little water can escape. It may also be that you have overdone the detergent. But this is not entirely normal. So, if you are not in the two previous cases, it is likely that we have some kind of crack inside our washing machine: in the rubber, in the tub, etc. or at the water inlet to the washing machine. This last case is quite common. You should inspect these hoses at least once a year, as they don’t usually last more than 5 years. They end up deteriorating and it is a very common cause of water leakage.

Finally, always try to find out where the water comes from. If you see, for example, that the water is coming from the door, there may be a problem with the mechanism.

Washing Machine Service in Coimbatore

The washing machine does not wash well

First check that the detergent and/or fabric softener trays are not clogged. If that is the case, you will be washing without detergent and it is normal that the clothes do not come out clean! Another very common reason is that you have overloaded the washing machine or that you have selected an inappropriate program. That makes your washes very inefficient. You may think that “you are saving”, but in reality you only get more than having to do a new laundry.

At other times, a faulty drainage system can also be the cause of this failure.

The washing machine smells bad

A few days ago, we gave some tips to prevent this from happening to you. In any case, check for blockages, especially the drain hose. Doing a cleaning cycle or using products such as “tea tree” are a good way to give your washing machine a change of scenery.

Washing Machine Service Centre in Coimbatore

Find your professional

Whether your problem is on this list or not, you already know that we would love to help you.

The 9 most common failures in washing machines (2024)

FAQs

The 9 most common failures in washing machines? ›

A washing machine not draining is one of the most common problems we encounter. It can be caused by one of the following: - The drain hose or pump is clogged with a small item of clothing, residual gunk or other debris. - The washer is malfunctioning and not engaging the drain/spin cycle properly.

What is the most common washing machine failure? ›

A washing machine not draining is one of the most common problems we encounter. It can be caused by one of the following: - The drain hose or pump is clogged with a small item of clothing, residual gunk or other debris. - The washer is malfunctioning and not engaging the drain/spin cycle properly.

What usually fails on a washing machine top loader? ›

Water Won't Drain

A failed lid switch can also keep the washer from advancing to the drain and spin cycle in some top-load washing machines. A failed timer or problem with the drive motor can also prevent a top-load washer from draining.

What usually breaks on a washing machine? ›

“If it stops spinning mid-cycle, the causes could be an overloaded drum, unbalanced laundry, excessive detergent, an unstable washing machine, or a blocked drain hose,” says Palmer-Smith, adding that “if the machine doesn't start turning at all, possible reasons include an improperly closed door, a broken catch on the ...

What are the four trouble symptoms of a washing machine? ›

10 Most Common Washing Machine Problems
  • It Bounces Around. ...
  • It's Noisy. ...
  • Clothes Are Getting Ripped. ...
  • Improper Or Slow Draining. ...
  • My Washing Machine Won't Spin. ...
  • There's No Water. ...
  • The Door Won't Open. ...
  • It's Smelly.
Aug 23, 2017

What brand of washer has the least problems? ›

Most Reliable Washer & Dryer Brands
  • Bosch. Topping our list is Bosch, a German manufacturer known for its reliable, compact appliances and commitment to high-quality manufacturing. ...
  • Miele. ...
  • Whirlpool. ...
  • Samsung. ...
  • LG. ...
  • GE. ...
  • Electrolux. ...
  • Maytag.
Feb 5, 2024

What is the longest average lifespan of a washing machine? ›

Washing Machine Lifespan

The average life of a washing machine ranges from 10 to 13 years, although some brands can manufacture washing machines with an even longer lifespan than the average appliance.

How long should a top-load washer last? ›

The lifespan of a standard top-load washer is 14 years while a high-efficiency washer is only 11 years.

What is the life expectancy of a top loader? ›

On average, a well-maintained top-load washing machine can last between 10 and 15 years. However, some machines may last longer or shorter depending on the quality of their parts and how often they are used.

What happens if you forgot to put soap in the washer? ›

Without a surfactant (your detergent, in this case), your clothing would simply sit in the water and come out close to the same way it went in: dirty.

What will mess up a washing machine? ›

If coins or other metal objects get spun around your machine, they will repeatedly bang against the washer's drum and glass door with strenuous force. Damage to the inner drum causes torn or pulled clothing, and damage to the outer drum can lead to leaks.

How do you diagnose a fault on a washing machine? ›

A fault code is displayed on the front of the machine as a combination of letters and lights or numbers. These fault codes vary from one manufacturer to another, so it can actually be just as helpful to watch your machine to diagnose where the fault is - such as in the drainage circuit or the heating circuit.

Why do washing machines break down so much? ›

Heat, water and constant motion put washing machines under strain, so it's not surprising that they are among the household appliances that are most likely to break down. In many cases, faults need expert attention, but regular checks can make major problems less likely.

How to reset a washing machine? ›

There really isn't a way to reset the washing machine. What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again.

What throws a washer off balance? ›

It's most likely the bearings are going out! These crucial components ensure that the drum spins smoothly and without excess vibration. So, when the bearings break down, they can't support the drum properly, leading to an off-balance and noisy cycle.

How do I know if my washing machine drum is loose? ›

How to identify a loose drum problem. If your washer has a loose drum, the chances are that you are hearing loud banging or grinding noises. You may also see some error codes on your washer's display screen.

How long should a washing machine last? ›

Average washing machine lifespan

Well, this figure obviously varies depending on lots of different factors - including brand, model, how you use it, and how well you maintain it. But generally, if you look after your washing machine properly you should it expect it to last anywhere between 7 and 12 years.

Can you factory reset a washing machine? ›

Some washing machines have a reset function, consult your manual for details. Also, reset by disconnecting from power for a few minutes. Open and close the door of the machine 6 times within 12 seconds for a master reset. Before a reset, check power, circuit breaker, child lock, drain house or adjust the load.

How do you know if your washing machine is going out? ›

If you hear unusual noises coming from your washing machine such as scraping, banging, thumping, or grinding, there's a very good chance that it is in need of repair or replacement. Pay special attention to noises that increase over time, as they can indicate a part that is getting ready to fail completely.

Top Articles
Latest Posts
Article information

Author: Kerri Lueilwitz

Last Updated:

Views: 5547

Rating: 4.7 / 5 (47 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Kerri Lueilwitz

Birthday: 1992-10-31

Address: Suite 878 3699 Chantelle Roads, Colebury, NC 68599

Phone: +6111989609516

Job: Chief Farming Manager

Hobby: Mycology, Stone skipping, Dowsing, Whittling, Taxidermy, Sand art, Roller skating

Introduction: My name is Kerri Lueilwitz, I am a courageous, gentle, quaint, thankful, outstanding, brave, vast person who loves writing and wants to share my knowledge and understanding with you.