How to Fix a Jammed or Stuck Keyboard Key: 5 Easy Ways (2024)

Co-authored byMobile Kangarooand Rain Kengly

Last Updated: January 2, 2024Fact Checked

Things You Should Know

Download Article

1. 1

   If the liquid on your keyboard has dried, clean the keys with alcohol. If you're using a mechanical keyboard, make sure the keyboard is unplugged first. If you're cleaning a laptop keyboard, make sure your laptop is turned off completely. If the spill is mostly on top of the keys, use a cotton swab and rubbing alcohol to clean the keys.

2. 2

   Rub the tops of the keys. Make sure they are free from stickiness.

   Advertisem*nt

3. 3

   Use the cotton swab to go around the edges before trying the keys again. Going around the edges should help with sticky keys, as it releases the bottom part of the key from the keyboard.^[1]

   • Once the alcohol is dry, check your keys to see if they are better.

Advertisem*nt

Download Article

1. 1

   Gently pry up the jammed key. Use a screwdriver or other flat instrument to get under the key, and pull up slightly on one of the edges. You can also use your nail.

   • If you are working on a laptop (whether PC or Mac), the key is held in place by a flimsy plastic clip, which also serves as the spring. The keys are attached in slightly different ways on each type of keyboard, so removing them will be different on each type. If you're unsure if or how your laptop keys come off, consult your manual.
   • Mechanical keyboards should not be fixed by prying at the keys. Most keyboards include a key puller that will remove individual key caps off of the keyboard.
   • Don't remove all the keys at once, as you may have trouble remembering where they all go. Try to remove only a few at a time.
2. 2

   Carefully wipe the inside of the button and the slot from which it was removed. Clear out any obstructions or crumbs that are jamming the key or the hinges underneath. You can use tweezers or toothpicks to help.

3. 3

   Use a cotton swab dipped in rubbing alcohol to clean off any sticky areas. Be sure not to have so much alcohol on the swab that it drips.

4. 4

   Let the key and keyboard fully dry. You don't want to leave any liquid underneath the keys, even rubbing alcohol.

5. 5

   Replace the keys and try typing again. Gently press the key down. It should snap back into place.

   • If using a laptop, insert the clip into the position it originally held before you place the key back into its spot.
   • The keys should be unstuck now. If not, you may need to take it into someone who repairs computers.

Advertisem*nt

Download Article

1. 1

   Unplug the keyboard. If you have a laptop, turn it off.

   See Also

   How to turn off Sticky Keys in Windows and disable the shortcutHow to clean sticky keyboard keys.How to turn off Sticky Keys in WindowsHow to safely unstick your keyboard without damaging your computer

2. 2

   Turn the keyboard upside-down. You can also hold it at an angle, as long as part of the keyboard is pointing towards the floor.

3. 3

   Gently shake the keyboard. Let the crumbs shake out to the floor or table.

   • You can tap the back of the keyboard gently to encourage the debris to fall out.
4. 4

   Brush away any extra crumbs and check the keys. If there's debris on the keyboard, brush it away. You can use a small paintbrush or a soft-bristled toothbrush.

   • If the key is still stuck, repeat the steps above, but tilt the keyboard in a different position. Crumbs may be trapped underneath the key itself.

Advertisem*nt

Download Article

1. 1

   Buy a can of compressed air. You can find it at almost any place that sells electronics.

2. 2

   Turn the computer off. If you have a desktop, unplug the keyboard from the computer.

3. 3

   Use the air to gently blow around and under the keys. Don't tilt the can, as it can pour out liquid.

4. 4

   Brush away any debris and try the keys again. If dirt or food is blown out, brush it away from the keyboard. You can use a small paintbrush or a soft-bristled toothbrush.

   • Once the debris is cleaned, test the keys.

Advertisem*nt

Download Article

1. 1

   Remove the key that isn't working properly. For example, if the 'A' key isn’t working, take it off. You can use a keycap puller, a flathead screwdriver, or a paperclip to remove a key.

2. 2

   Pop off a working key and place the working key into the problem key position. For example, place the working 'S' key into the 'A' key position. If the 'S' key works while in the A spot, this means that the problem is with the actual A key and not the membrane or mechanical switch.

3. 3

   Compare the problem key with the working key and look for inconsistencies. In some cases, there's a ridge that fits into a slot, if the ridge has a bump in it, this can be fixed with a knife or scissors, run the sharp edge along the ridge back and forth to smooth out the ridge and try the key again.

4. 4

   Order replacement keys online or through manufacturer if necessary. If that's not possible, another option is to find a very cheap, broken keyboard of the same model (i.e. auction site), where the keys are still in good condition. This way, you can salvage keys from the cheap, broken keyboard to use in your working keyboard.

Advertisem*nt

Expert Q&A

Ask a Question

Thanks for submitting a tip for review!

Warnings

Things You'll Need

How helpful is this?